Search results

Used to carry the cables horizontally throughout the system. Accepts hinged cover HC2YL6. Use QuikLock Coupler FBC2X2YL to attach channel and/or fittings. Base and covers sold separately.

Category: Straight Channel Cable Tray

1/4" plastic bolts and hex nuts fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

The FiberRunner® 4x4 Channel can be used with fittings and brackets to design a routing system to separate, route, and protect fiber optic and high-performance copper cables. The cable routing channel accepts cable retainers or a hinged cover.

Category: Straight Channel Cable Tray

The Wyr-Grid® Overhead Cable Tray Bottom Waterfall is designed to maintain a 1.38in (35mm) bend radius while transitioning fiber optic, power, and copper data cables from within the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Cable Tray Drop Outs

Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod

Category: Cable Tray Mounting Hardware

Optional snap-on cover for channel FR24X4BL10. Supplied in four 30 long pieces.

Category: Straight Cable Tray Covers

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12YL6. Use QuikLock Coupler FRBC12X4YL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

Used to carry the cables horizontally throughout the system. Accepts hinged cable retainers FRCR6BL-X, hinged cover FRHC6BL6 or split hinged cover FRSHC6BL6. Use QuikLock Coupler FRBC6X4BL to attach channel and/or fittings.

Category: Straight Channel Cable Tray

The fiber mounting FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 12" (305mm) width is used to support a FiberRunner® 4x4 and 6x4 Channel above or below the Wyr-Grid® 12" Pathway using the same 1/2" or 12mm threaded rod used to support

Category: Cable Tray Trapeze Hangers

1/4" plastic bolts and wing Connector fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Used to carry the cables throughout the Fiber-Duct Routing System. Accepts cover C4BL6. Cover sold separately.

Category: Straight Channel Cable Tray

The black powder coated intersection splice connector is 3.01" (76.4 mm) high, 3.30" (81.3 mm) long, and 1.35" (34.2 mm) wide and quickly joins Wyr-Grid® Pathways at all intersections. A thread cutting screw pierces through the paint of perpendicular path

Category: Cable Tray Fast Splicers

Used to carry the cables horizontally throughout the system. Accepts hinged cover HC2BL6. Use QuikLock Coupler FBC2X2BL to attach channel and/or fittings. Base and covers sold separately.

Category: Straight Channel Cable Tray

The Wyr-Grid® 18" (457.2 mm) FiberRunner® QuikLock™ Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 18.7" (475.0 mm) long, 2.3" (58.4 mm) wide, and 18.7" (475.0 mm) deep. It attaches to the Wyr-Grid® 18" (457.2 mm

Category: Cable Tray Trapeze Hangers

The Wyr-Grid® 24" (609.6 mm) FiberRunner® QuikLock™ Trapeze Bracket is made of steel and is black powder coated. It is 12.2" (309.9 mm) high, 24.7" (627.4 mm) long, 2.3" (58.4 mm) wide, and 24.7" (627.4 mm) deep. It attaches to the Wyr-Grid® 24" (609.6 mm

Category: Cable Tray Trapeze Hangers

Used to fully enclose 12x4 channel in conjunction with the Spill-Over Junction FRSPJ2X2BL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Straight Cable Tray Covers