Search results

IDE B-14-50-0-D CBL TIE14"50L

Category: Non-Releasable Cable Ties

The adhesive mount in black is mounted with acrylic adhesive tape and measures 1.12" x 1.12" (28.5 mm x 28.5 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

4-Way Anchor-Mount Cable Tie Base, Uses #8 (M4) Screws, Flame Retardant Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

The adhesive mount in black is mounted with acrylic adhesive tape and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 31"L (78

Category: Non-Releasable Cable Ties

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 1.44" (35.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is gray. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Cable Tie Mount, Applied with #4 (M2.5) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

Latching flat cable holders, #6 screw (M3), 2" (50.8mm) cable width, gray.

Category: Cable Tie Bases

Cable Tie Mount, 1.12" x 1.12" (28.5mm x 28.5mm), Uses #6 (M3) Screws Or User Supplied Adhesive, Weather-Resistant Nylon 6.6, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The flat cable mounting system uses one base, one corresponding size plate (FCPI), and one intermediate cross section cable tie to secure stacked 1.0" (25.4 mm) wide cables, folds, and breakouts, as well as laminated and molded bus bars. For indoor use on

Category: Cable Tie Bases

Panduit® Wave-Ty® Ties readily expand and contract to accommodate electric heat trace applications. Plus, ties are built with 304 stainless steel, so it is perfectly suited for indoor and outdoor environments. Standard, 14.3L (363mm), Bundles up to 4.0 (

Category: Non-Releasable Cable Ties

Pan-Steel® 360-degree Radial Seal Retained Tension Ties speed up installation with a unique self-locking head design that locks into any part of the 304 stainless steel tie. Plus, the aggressive head and displacement lock provide a quick, tight lock in an

Category: Non-Releasable Cable Ties

Yellow, thermal transfer marker plate, 2.00" x 0.50".

Category: Cable Tie Marker Plates

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 31"L (787mm), 0.6"W (16mm), Tensile Strength: 372

Category: Non-Releasable Cable Ties

Marker plate, four holes, 304 Stainless Steel, 1.72" x .75".

Category: Cable Tie Marker Plates

Marker plate, four holes, 304 Stainless Steel, 3.50" x .75", standard package.

Category: Cable Tie Marker Plates

Aluminum marker plate, aluminum color, bulk package.

Category: Cable Tie Marker Plates

Cable Tie, Intemediate, Nylon, Natural Color, 6" Long, 100/PK, 1.25" Max Bundle Diameter, 30lb Tensile Strength, .14" Wide

Category: Non-Releasable Cable Ties

Panduit® Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 316 stainless steel, so it can withstand harsh environments. Heavy, 250'L (76m), Tensile Stre

Category: Banding & Strapping

Pan-Steel® 360-degree Radial Seal Retained Tension Ties speed up installation with a unique self-locking head design that locks into any part of the 304 stainless steel tie. Plus, the aggressive head and displacement lock provide a quick, tight lock in an

Category: Non-Releasable Cable Ties

The right angle base in black accepts a flat cable width of 2.0" (50.8 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 100.

Category: Cable Tie Bases

THB TY272MFR CABLE TIE 120LB

Category: Non-Releasable Cable Ties

Dual-Lock Stainless Steel Cable Ties

Category: Non-Releasable Cable Ties