Search results

CAT MPNY-1000S-0-C MNTG BASE

Category: Cable Tie Bases

THB TY272MFR CABLE TIE 120LB

Category: Non-Releasable Cable Ties

The Tak-Ty hook and loop cable tie mount in black is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HL

Category: Cable Tie Bases

4-Way Adhesive-Backed Cable Tie Mount, 1.5" Long x 1.5" Wide (38.1 x 38.1 mm), Nylon 6.6, High Temperature Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 200

Category: Cable Tie Bases

Cable Tie Mount, 1.0" Long x 1.0" Wide (25.4 x 25.4 mm), Uses #6 (M3) Screws Or User Supplied Adhesive, ABS Indoor/Outdoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

Harness Identification Marker Plate, 3.50" x 0.75"(88.9mm x 19.1mm), weather resistant, black.

Category: Cable Tie Marker Plates

Mini marker plate, four holes, 304 Stainless Steel, 1.72" x .38".

Category: Cable Tie Marker Plates

Pan-Steel® Nylon 11 Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Nylon to promote worker safety and

Category: Non-Releasable Cable Ties

The screw applied mount for Tak-Ty hook and loop cable ties in natural uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with

Category: Cable Tie Bases

Cable Tie, Intemediate, Nylon, Natural Color, 6" Long, 100/PK, 1.25" Max Bundle Diameter, 30lb Tensile Strength, .14" Wide

Category: Non-Releasable Cable Ties

Hook & Look Cable Tie Mount, Nylon, Black, Adhesive, Use with HLT, HLS, TTS & UCT Ties, 100/PK

Category: Cable Tie Bases

Latching flat cable holders, #6 screw (M3), 2" (50.8mm) cable width, gray.

Category: Cable Tie Bases

Cable Tie Mount, 1.12" x 1.12" (28.5mm x 28.5mm), Uses #6 (M3) Screws Or User Supplied Adhesive, Weather-Resistant Nylon 6.6, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The flat cable mounting system uses one base, one corresponding size plate (FCPI), and one intermediate cross section cable tie to secure stacked 1.0" (25.4 mm) wide cables, folds, and breakouts, as well as laminated and molded bus bars. For indoor use on

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 1.44" (35.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

Cable Tie, Intemediate, Nylon, Natural Color, 6" Long, 1000/PK, 1.25" Max Bundle Diameter, 30lb Tensile Strength, .14" Wide

Category: Non-Releasable Cable Ties

Ideal; Screw Mounting Base; Standard; Mount Size: 0.870 In Length X 0.640 In Width X 0.380 In Height; Material: Nylon; Color: Uv Black; Mounting: Screw Mount; Slot Height: 0.125 In; Slot Width: 0.300 In; Screw Diameter: 1/4 In

Category: Cable Tie Bases

White, thermal transfer marker plate, 2.00" x 0.5".

Category: Cable Tie Marker Plates

High Performance Cable Tie for Indoor Applications, Orange Color Nylon 6.6, Length of 617mm (24.3 Inches) for Bundle Diameter up to 177mm (6.96 Inches), Width of 6.9mm (0.27 Inch), Tensile Strength Rating of 534 Newtons (120 Pounds), Operating Temperature of -60 Degrees Celsius (-76 F) to 85 Degrees Celsius (185 F), UL/EN/CSA62275 Type 2/21S Rated for AH-2 Plenum and as a Flexible Cable and Conduit Support, Bulk Pack

Category: Non-Releasable Cable Ties

Panduit® MLT Wave-Ty® Ties readily expand and contract to accommodate electric heat trace applications. Plus, ties are built with 316 stainless steel, so it is perfectly suited for harsh and difficult environments. Heavy, 14.3L (363mm), Bundles up to 4.0

Category: Non-Releasable Cable Ties

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 18"L (457mm), 0.5"W (13mm), Tensile Strength: 297

Category: Non-Releasable Cable Ties

Pan-Steel® Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Super-heavy cross section, Max

Category: Non-Releasable Cable Ties

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Panduit® MLT Wave-Ty® Ties readily expand and contract to accommodate electric heat trace applications. Plus, ties are built with 304 stainless steel, so it is perfectly suited for indoor and outdoor environments. Standard, 14.3L (363mm), Bundles up to 4

Category: Non-Releasable Cable Ties