Cable Tie Bases

The Tak-Ty hook and loop cable tie mount in black is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HL

Category: Cable Tie Bases

Cable Tie Mount, 1.12" x 1.12" (28.5mm x 28.5mm), Uses #6 (M3) Screws Or User Supplied Adhesive, Weather-Resistant Nylon 6.6, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The flat cable mounting system uses one base, one corresponding size plate (FCPI), and one intermediate cross section cable tie to secure stacked 1.0" (25.4 mm) wide cables, folds, and breakouts, as well as laminated and molded bus bars. For indoor use on

Category: Cable Tie Bases

4-Way Adhesive-Backed Cable Tie Mount, 1.5" Long x 1.5" Wide (38.1 x 38.1 mm), Nylon 6.6, High Temperature Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 200

Category: Cable Tie Bases

Cable Tie Mount, 1.0" Long x 1.0" Wide (25.4 x 25.4 mm), Uses #6 (M3) Screws Or User Supplied Adhesive, ABS Indoor/Outdoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The screw applied mount for Tak-Ty hook and loop cable ties in natural uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with

Category: Cable Tie Bases

Stainless steel two-way mount, one-hole mounting. Use with standard, light-heavy and heavy stainless steel ties.

Category: Cable Tie Bases

The right angle base in black accepts a flat cable width of 2.0" (50.8 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 100.

Category: Cable Tie Bases

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is gray. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Push Rivet Low Profile Cable Tie Mount, 0.169" (4.3 mm) Hole, Nylon 6.6, Blue, Package of 1000

Category: Cable Tie Bases

NSI FTH15A ADHESIVE TIE MOUNT

Category: Cable Tie Bases

CAT MPNY-1000S-0-C MNTG BASE

Category: Cable Tie Bases

CABL CLMP MNT BASE SM

Category: Cable Tie Bases

Cable Tie Mount, Applied with #4 (M2.5) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

Two-Way Detectable Mounting Base, Detectable Blue Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 6.4mm (0.25 Inches), Self-Adhesive Mounting Method, 100 Pack

Category: Cable Tie Bases

THB TC342 2WAY MTG BASE 1.1X1

Category: Cable Tie Bases

Multiple Tie Plate, Length: 4.25", Uses #10 (M5) Screws, 6.6 Nylon, Indoor, Natural, Package of 100

Category: Cable Tie Bases

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.19" (4.8 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

Cable Tie Mount, Applied with #8 (M4) Screws, 0.61" (16mm) Wide, Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

The cable tie mount in black is installed onto a 0.31" (7.9mm) stud. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The adhesive mount in black is mounted with acrylic adhesive tape and measures 1.12" x 1.12" (28.5 mm x 28.5 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

4-Way Anchor-Mount Cable Tie Base, Uses #8 (M4) Screws, Flame Retardant Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

The cable tie mount is black and is applied with a #8 (M4) screw. It is 0.66" (16.7 mm) long and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with cable ties Super-Grip® mini

Category: Cable Tie Bases

The pan-post standoff is black and requires a #10 (M5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases