Cable Tie Bases

1/2 Inch Magnetic Cable Clamp. Color: Black. Magnetic Strength: 26 Pounds, Pack Quantity: 10.

Category: Cable Tie Bases

The pan-post standoff is natural color and requires a #12 (M5.5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 10.

Category: Cable Tie Bases

Saddle Support Mounting Base, Heat Stabilized Black Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F), Length of 23.42mm (0.922 Inches), Width of 14.29mm (0.563 Inches), Height of 10.72mm (0.422 Inches), Mount with #10 Screw, Bulk Pack

Category: Cable Tie Bases

Cable Clip, 0.50 to 0.77 Inch Bundle Diameter, 1-5/8 Inch Strut Attachment, Polyamide, Black, 25/Bag

Category: Cable Tie Bases

Masonry push barb cable tie mount, standard, .25" (6.4mm) hole, black, standard package.

Category: Cable Tie Bases

THB TC1112 CBLE MNT STRIPS

Category: Cable Tie Bases

Masonry Push Barb Cable Tie Mount, Fir Tree Mount, Hole Diameter of 0.19" (4.8 mm), Indoor/Outdoor Use, Black, Package of 1000

Category: Cable Tie Bases

Cable Tie Anchor Mount, .86" x .61", .18" Hole Dia, .31" Max Tie Width, PA66, White

Category: Cable Tie Bases

Multiple Tie Plate, Requires #6 (M3) Screws, Nylon 6.6, Indoor Use, 2.09" x 0.62" x 1.5", Natural, Package of 100

Category: Cable Tie Bases

Saddle Tie Mount Black .236" hole 100

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in white is mounted with acrylic adhesive tape. It is 1.5" long x 1.5" wide (38.1 x 38.1 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with min

Category: Cable Tie Bases

The epoxy applied cable tie mount in natural color is affixed with EMA epoxy adhesive. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties.

Category: Cable Tie Bases

Cable Tie Mount, Mounted With A #6 (M3) Screw Or User Supplied Adhesive, 1" Long x 1" Wide (25.4 x 25.4 mm), Nylon 6.6, Indoor Heat and Wear Resistant, Used with Miniature, Intermediate, and Standard Cables Ties, Natural, Package of 500

Category: Cable Tie Bases

Cable Tie Mount, 4-Way, Adhesive Backing, Nylon, 1" Long x 1" Wide (25.4 x 25.4 mm), Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1.5" long x 1.5" wide (38.1 x 38.1 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with mini

Category: Cable Tie Bases

THB TC115-TB CABLE MOUNTING B

Category: Cable Tie Bases

THB TC104 MINI MTG BASE .4X.3

Category: Cable Tie Bases

THB TC200X200AX 4WAY MTG BASE

Category: Cable Tie Bases

Low Profile Cable Tie Mount, Attach With a #5 (M3) Screw, Made of Nylon 6.6, For Use With Miniature Cable Ties, Indoor, Color: Natural, Package of 1000

Category: Cable Tie Bases

Lightening Hole Cable Tie Mounts, Secure Cable Bundles That Run Through Bulkhead Lightening Holes and Protect Them From Sharp Edges, Indoor Environments and With #10 (M5) Screws or 3/16 (4.7) Rivets, Nylon 6.6, Natural, Package of 500

Category: Cable Tie Bases

The Hyper V cable tie mount in black is made of weather resistant Nylon 6.6 and is mounted by #12 (M6) screw or tapered rivet. It comes in packages of 100.

Category: Cable Tie Bases

Snap-In Cable Tie Mount, Uses #6 (M3) Screws, ABS Material, White, Package of 500

Category: Cable Tie Bases

Multiple Tie Plate, Length: 6.59", Uses #10 (M5) Screws, 6.6 Nylon, Indoor, Natural, Package of 100

Category: Cable Tie Bases

The cable tie mount in black is applied with a #8 (M4) screw and is 0.43" (10.9 mm) wide. It is made of weather-resistant polypropylene for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases