Search results

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.19" (4.8 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

The cable tie mount in black is applied with a #6 (M3) screw and is 0.43" (10.9 mm) wide. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages

Category: Cable Tie Bases

Cable Tie Mount, Applied with #8 (M4) Screws, 0.61" (16mm) Wide, Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

The cable tie mount in black is installed onto a 0.31" (7.9mm) stud. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The adhesive mount in black is mounted with acrylic adhesive tape and measures 1.12" x 1.12" (28.5 mm x 28.5 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

The adhesive mount in black is mounted with acrylic adhesive tape and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for o

Category: Cable Tie Bases

The cable tie mount in aqua is applied with a #8 (M4) screw and is 0.43" (10.8 mm) wide. It is made of Tefzel for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The pan-post standoff is black and requires a #10 (M5) screw. It measures 1.06" long x 0.72" wide x 4.60" high (26.9 x 18.3 x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

The right angle base in black accepts a flat cable width of 2.0" (50.8 mm) and is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and comes in packages of 100.

Category: Cable Tie Bases

Push Rivet Low Profile Cable Tie Mount, 0.169" (4.3 mm) Hole, Nylon 6.6, Blue, Package of 1000

Category: Cable Tie Bases

Cable Tie Mount, Applied with #4 (M2.5) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

The Tak-Ty hook and loop cable tie mount in black is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/HL

Category: Cable Tie Bases

Cable Tie Mount, 1.0" Long x 1.0" Wide (25.4 x 25.4 mm), Uses #6 (M3) Screws Or User Supplied Adhesive, ABS Indoor/Outdoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

4-Way Anchor-Mount Cable Tie Base, Uses #8 (M4) Screws, Flame Retardant Nylon 6.6, Natural, Package of 1000

Category: Cable Tie Bases

The cable tie mount is black and is applied with a #8 (M4) screw. It is 0.66" (16.7 mm) long and made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with cable ties Super-Grip® mini

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 1.44" (35.6 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

The push button cable tie mount requires a 0.25" (6.4 mm) hole and is gray. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

Flat cable mounting system, FCPI plate, 2" (50.8mm) cable width, black, standard package.

Category: Cable Tie Bases

The Tak-Ty hook and loop cable tie mount in natural is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/

Category: Cable Tie Bases

The cable tie mount in natural uses #6 (M3) screws or user supplied adhesive. It measures 1.12" long x 1.12" wide (28.5 x 28.5 mm). It is used with miniature, intermediate, and standard cable ties. It is made of flame-retardant nylon 6.6, which increases

Category: Cable Tie Bases

The epoxy applied cable tie mount kit in black is made of two-part epoxy and nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It includes 4 epoxy cups, 4 mixer sticks, 4 EMS mounts, and 12 cable ties. It is used wit

Category: Cable Tie Bases

The epoxy applied cable tie swivel mount in natural is affixed with user supplied EMA epoxy. It is 1.13" long x 1.13" wide (28.7 x 28.7 mm) and has an aluminum base and a nylon mount. It is used with miniature, intermediate, and standard cable ties. It is

Category: Cable Tie Bases

Cable Tie Mount, 2.0" Long x 2.0" Wide (50.8 x 50.8 mm), Uses #6 (M3) Screws Or User Supplied Adhesive, Nylon 6.6, Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 200

Category: Cable Tie Bases

Cable Tie Mount, Mounted With A #6 (M3) Screw Or User Supplied Adhesive, 1" Long x 1" Wide (25.4 x 25.4 mm), Nylon 6.6, Indoor Heat and Wear Resistant, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 500

Category: Cable Tie Bases