"wiremold"

WMD RC4KTCBS SCRUB WATER RETR

Category: Assembled Poke-Through Units

WMD 2150CHA 1-1/2IN TRADE SIZ

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

WMD 6ATCFFBZ 6IN FURNITURE FE

Category: Assembled Poke-Through Units

WMD RC7AM2TCAL 2IN. FURNITURE

Category: Assembled Poke-Through Units

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

WMD 4ATP4RSN

Category: Assembled Poke-Through Units

WMD 6ATC2PBK3H 6IN 3HR PREWIR

Category: Assembled Poke-Through Units

4IN PREWIRED SURFACE 4 REC SB

Category: Assembled Poke-Through Units

4IN PREWIRED SURFACE DUP CR AA

Category: Assembled Poke-Through Units

4IN PREWIRED SURFACE 4 REC SN

Category: Assembled Poke-Through Units

TPP DUPLEX 2-20A BLACK 10FT.

Category: Assembled Poke-Through Units

WMD 4ATCP2RNK 4IN PREWIRED-SU

Category: Assembled Poke-Through Units

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Poke-Thru Device, Evolution Series, 4 Inch Diameter, Includes (2) 20 Amp Pre-Wired Duplex Receptacles, Die Cast Aluminum With Gray Powder Coat Finish

Category: Assembled Poke-Through Units

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 10 Inch Diameter, Aluminum With Gray Powder Coat Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini a

Category: Assembled Poke-Through Units