"wiremold"

WMD 4ATP2RAA

Category: Assembled Poke-Through Units

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Anodized Aluminum

Category: Assembled Poke-Through Units

Poke-Thru Device, 8 Inch Diameter, Prewired, (2) 20A Duplex Receptacles, (1) 1/2 Gang Blank Housing, (3) 1 Gang Pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider Included

Category: Assembled Poke-Through Units

Poke-Thru Device, Evolution Series, 4 Inch Diameter, Includes (2) 20 Amp Pre-Wired Duplex Receptacles, Die Cast Aluminum With Gray Powder Coat Finish

Category: Assembled Poke-Through Units

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 10 Inch Diameter, Aluminum With Gray Powder Coat Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Wlk Rc3ctcab Bs Fl & Bs Cv 20

Category: Assembled Poke-Through Units

WMD RC7AFFTCAL-LJB P-THRU ASS

Category: Assembled Poke-Through Units

WMD 10PPS 10IN PREPOUR SLEEVE

Category: Assembled Poke-Through Units

Center-gang 2" trade size conduit service feed assembly. Designed to allow connection to 2" trade size conduit feed in two (2) of the four (4) center- gang locations.

Category: Assembled Poke-Through Units

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

Multi-Service Poke-Thru, Finish Flange & Slide Holder Assembly, RC3 Series, Color: Black. Diameter: 7-1/2". Includes: 2 Ortronics TracJack mounting Bezels, and 2 Ortonics Series II bezels.

Category: Assembled Poke-Through Units

COMM UFD FLUSH FTG BLACK

Category: Assembled Poke-Through Units

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

UFD FLUSH FTG QUAD 15A RECEPT BLACK

Category: Assembled Poke-Through Units

Use with RC9CMD and RC9AM2TC Series Covers to complete installation. NOTE: RC9AMD and RC9AM2TC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Poke-Thru Device Retrofit Kit, RC3 Series, Color: Gray Flange. Diameter: 7-1/2". Upgrade for Carpet Flooring, Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) and Duplex Receptacle Barrier.

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 16-1/4 Inch, Black

Category: Assembled Poke-Through Units

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini a

Category: Assembled Poke-Through Units

8IN TILE SHIMS

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier

Category: Assembled Poke-Through Units