"wiremold"

W-mold 241-h/btc Housing/base

Category: Assembled Poke-Through Units

Poke-Thru Device, Prewired Surface Assembly, 6 Inch Diameter, Brushed Aluminum Finish

Category: Assembled Poke-Through Units

WMD 4ATCP2CRBK 4IN PREWIRED-S

Category: Assembled Poke-Through Units

8IN CORE-UNWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze.á Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartments: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly (tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, and One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Black

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED-SURFACEWAL 6ATCNK 6IN CORE-UNWIRED-SURFACE

Category: Assembled Poke-Through Units

8" Poke-Thru Device, Recessed, Evolution Series, Brass8" Poke-Thru Device, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist Open. Recessed: 3-1/4", No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BK) painted black.

Category: Assembled Poke-Through Units

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Poke-Thru Device, Recessed, Assembled Unit, Metallic, For Use In 6 Inch Diameter Opening, Recessed 3 1/4 Inch Below Floor Surface, Die-Cast Aluminum Cover Assembly, Available in the Following Powder Coated Finishes: Black, Gray, Nickel, Brass, Bronze, and Aluminum, For Carpet, Tile, Wood And Laminate Concrete Floor Coverings.

Category: Assembled Poke-Through Units

6" Poke-Thru Assembly, Prewired for A/V, Duplex ReceptPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Twist, Material/Finish: Die-Cast Aluminum/Gray, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". Cover Type: Slide, Device Type: (1) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts the Extron® Electronics AAP and MAAP Series Devices, For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

8" Poke-Thru Device, Recessed, Evolution Series, Nickel8" Poke-Thru Device, Recessed Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Recessed: 3-1/4", No Device: Communication, or A/V Capability, Color Nickel, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

8IN CORE-PREWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Bronze

Category: Assembled Poke-Through Units

8IN CORE-PREWIRED-FLUSHWAL 8ATPGY 8IN CORE-PREWIRED-FLUSH

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Poke-Thru Assembly, Diameter: 6", Type: (2) Duplex, MetallicPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Aluminum

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED

Category: Assembled Poke-Through Units

For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly provides one (1) 3/4" trade size screw plug opening and one (1) concentric 2"-1 1/4" trade size screw plug opening and is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 5FFHA 1 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Nickel

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter 8 Inch, Depth 16-1/4 Inch, Aluminum

Category: Assembled Poke-Through Units