Search results

WMD 10PPS 10IN PREPOUR SLEEVE

Category: Assembled Poke-Through Units

UFD FLUSH FTG QUAD 15A RECEPT BLACK

Category: Assembled Poke-Through Units

WMD RC7AFFTCAL-LJB P-THRU ASS

Category: Assembled Poke-Through Units

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

Wlk Rc3ctcab Bs Fl & Bs Cv 20

Category: Assembled Poke-Through Units

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finished with a brass flange also available with black colored device plate. Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Poke-Thru Device Retrofit Kit, RC3 Series, Color: Gray Flange. Diameter: 7-1/2". Upgrade for Carpet Flooring, Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) and Duplex Receptacle Barrier.

Category: Assembled Poke-Through Units

Multi-Service Poke-Thru, Finish Flange & Slide Holder Assembly, RC3 Series, Color: Black. Diameter: 7-1/2". Includes: 2 Ortronics TracJack mounting Bezels, and 2 Ortonics Series II bezels.

Category: Assembled Poke-Through Units

Use with RC9CMD and RC9AM2TC Series Covers to complete installation. NOTE: RC9AMD and RC9AM2TC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 16-1/4 Inch, Black

Category: Assembled Poke-Through Units

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

COMM UFD FLUSH FTG BLACK

Category: Assembled Poke-Through Units

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6 Inch, Depth: 16-1/4 Inch, Black

Category: Assembled Poke-Through Units

WMD RC7KTCGY RC7 RETROKIT GY

Category: Assembled Poke-Through Units

WMD RC4KTCGY SCRUB WATER RETR

Category: Assembled Poke-Through Units

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color plated brass.

Category: Assembled Poke-Through Units

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum. Diameter: 7 Inch. Depth: 10 Inch, Includes: Bezels to Accept 4 Ortronics TracJack Modular Jacks and (2) Ortronics Series II Modular Jacks

Category: Assembled Poke-Through Units

All communication device accepts up to four UTP connectors. Finished with a brushed brass flange and a black device plate. Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier must be replaced with new. See installation instructions with retrofit kit for complete installation details. Black

Category: Assembled Poke-Through Units

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Brass Finish Flange Nonmetallic Colored Brass Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units