"wiremold"

Device Mounting Plate, Type: (8) Port, Metallic, Device Plate That Will Accept Up To Eight (8) Ports of Communication Devices, For use in the center compartment only. Devices supplied by others.

Category: Poke-Through Mounting Plates

Rectangular Floor Box, Adjustable, 2-Gang, Depth: 3-7/16 Inch, Steel

Category: Recessed Adjustable Floor Boxes

The new Wiremold Metal Raceway Laser Level simplifies and streamlines the process of installing 500 and 700 Series Raceway. The Laser Level provides perfect visual alignment for runs of metal raceway. Speed up your raceway installation projects and get off the job faster with the new Metal Raceway Laser Level. Finish - Red

Category: Laser Levels

Steel, 90° Flat Elbow, 3000 Series. Size: 4" Inside, 6" Outside. Ivory.

Category: Small 2-Piece Metallic Raceway Elbows

Steel, Fixture Box with Solid Base, 500, 700 Series. Size: 6-3/8" Diameter, 1" Height. Includes: (4) Holes for Fixture Studs, (5) 1/2" Trade Size KOs. Ivory.

Category: Round Raceway Solid Base Boxes

Steel, Round Extension Box with Open Base, 500, 700 Series. Size: 4-3/4" Diameter, 1" Height. Ivory.

Category: Round Raceway Open Base Boxes & Covers

Mounts standard after-market devices into 3000 Series Raceway. Accepts single-gang devices with 3.281" (95mm) mounting centers. Use with commercially available flush plates (not furnished).

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Installs commercially available 15A and 20A rectangular receptacles into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 1-Gang Raceway Device Brackets & Plates

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Black. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Non-Metallic, 1-Gang, Shallow Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 7/8" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Non-Metallic GFI. Device Type: Decorator/GFCI Receptacle. brown.

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Black Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Brushed aluminum GFI cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). May be used with Wiremold CM Series adapters and Ortronics Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Internal GFI Decorator Bracket, Accepts Standard GFCI Receptacles

Category: Recessed Floor Box Service Fittings

Internal Bracket, Type: GFI Receptacle, Metallic, Communication or Audio/Video Devices, For RFB4 Only.

Category: Recessed Floor Box Service Fittings

Ultrasonic Ceiling Sensor utilizing 32 KHz frequency ultrasonic technology to detect occupancy. Voltage: 24 VDC, Current: 40 ma. Automatic or manual-on operation when used with a BZ-150 Power Pack. Omni-directional transmission (360° coverage) 2200 Sq.ft., 90 linear feet. Features: Isolated relay. Mounts to ceiling tile or Wiremold V5738-WH box.

Category: Ultrasonic Occupancy Sensors

Steel, External Cover, 2000 Series. Size: 1-7/8". Ivory.

Category: Small 2-Piece Metallic Raceway Elbows

Non-Metallic, 1-Gang, Deep Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, Ivory.

Category: 1-Gang Raceway Device Boxes

Non-Metallic, Latching Raceway, 400 Series. Size: 5' Length, 7/8" Width, 7/16" Height. PVC, Ivory. Adhesive lined on back. Package Quantity: 100

Category: 2-Piece Non-Metallic Raceway

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and brass cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

Non-Metallic, 2-Gang, Device Box, 2300 Series. Size: 4-3/4" Length, 4-7/8" Width, 1-3/8" Depth. PVC, White.

Category: 2-Gang Raceway Device Boxes

Non-Metallic, 1-Gang, Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 1-3/8" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Steel, Blank End Fitting, 6000 Series. SIze: 1-1/2". Ivory.

Category: Large 2-Piece Metallic Raceway End Fittings

1-Gang, Floor Box Cover, Non-Metallic, Cover Type: Two Door/Dual Service. Device Type: Duplex Receptacle. Color: Black.

Category: Square / Rectangle Recessed Box Covers