"wiremold"

For covering duplex style devices. Accepts 106 Frame. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Two-gang 2" trade size conduit housing assembly. Used on 8AT Series devices. Covers two (2) of the three (3) gangs in the center compartment. Only for use with 8AT Series units.

Category: Poke-Through Mounting Plates

Steel, Blank End Fitting, 2000 Series. Size: 3/4" Length. White.

Category: Plugmold End Fittings

Non-Metallic, Twin Snap Cover, 5400 Series. Size: 8' Length, 2-9/16" Compartment Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

Closes off open end of 4000 Series Raceway. Has two 1/2" trade size KOs to facilitate end feeding. Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Steel, Base & Cover, V2400 Series. Size: 5' Length, 7/8" Height, 1 29/32" Width, Ivory.

Category: Small 2-Piece Metallic Raceway Bases & Covers

Steel, End Reducing Connector, 2000 Series. Size: 3/4". For use with: V500 Raceway. Ivory

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Poke-Thru Device, Assembled, RC7 Series, Black Non-Metallic Cover, Includes 20 Amp Duplex Receptacle and (2) Cat 6 Keystone Connectors

Category: Assembled Poke-Through Units

Floor Box, 6 Gang, On Grade Type, 3 Inch Depth, (14) Knockouts 1, 3/4, and 1-1/4 Inch, Steel

Category: Square Recessed Floor Boxes

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Non-Metallic, 2-Gang, Device Mounting Bracket., 4000 Series. Size: 6" Length. Plastic, Gray.

Category: 2-Gang Raceway Device Brackets & Plates

Steel, 2-Gang, Device Box, OFR Series, Color: Black.

Category: Metallic Overfloor Raceway Device Boxes

Single Gang Two-Piece Snap Together Outlet Box with Adhesive Backing, Off-White, Accepts Pan-Way Screw-On Faceplates or NEMA Standard Single Gang Faceplate, Use with Pan-Way T-45 or LD Profile Raceways. Length: 5 Inch, Width: 3.26 Inch, Height: 1.62 Inch.

Category: 1-Gang Raceway Device Boxes

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Flange available in painted gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Slide covers match the painted flange colors: gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

Uniduct 2800 Series One-Piece Latching Raceway Fitting, White, Non-Metallic, Available in 6' (1.8m) lengths, packed 120' (36.6m) per carton. 2800 Series. Ivory Finish - White

Category: 1-Piece Non-Metallic Raceway

4 Inch Poke-Thru Multi-Service Device, Includes: (4) 20A Duplex Receptacles, Ortronics TracJack Mounting Adapters and Ortronics Series II Communication Housing, Aluminum

Category: Assembled Poke-Through Units

Steel, Full Capacity Tee, 4000 Series. Size: 12" Length. Ivory.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Steel, 2-Gang, Device Box, 2000 Series. Size: 1-3/4" Depth. Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, 2-Gang, Device Plate, 4000 Series. Size: 5-1/8" Length. Ivory.

Category: 2-Gang Raceway Box Covers

20 Amp Duplex Receptacle 2400 Series Raceway, Ivory, 3-Wire, 125 Volt, NEMA 5-20R

Category: 1-Gang Raceway Duplex Receptacles

2-Gang, Adjustable Floor Box, Steel, Depth: 3-15/32". Cubic Inches: 117". Knockouts: (4) 1/2", (8) 3/4" & (4) 1". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour)

Category: Recessed Adjustable Floor Boxes

Non-Metallic, 90° Flat Elbow, 2800 Series. Size: 2" Length. PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, 1-Gang, Extra Deep Device Box, 2300BACD Series. Size: 4-3/4" Length, 3" Width, 2-3/4" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes