"wiremold"

Extra Deep Device Box, 2-Gang, 500/700/2000 Series Raceway, Ivory, Size: 4-5/8" Length, 2-7/8" Width, 2-3/4" Depth

Category: 2-Gang Raceway Device Boxes

Non-Metallic, Tee Fitting, PN05 Series, Size: 2-15/16" Length, 4-3/4" Width, PVC, White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Steel, Prewired Plugmold, Length: 6 ft. Color: White. Outlets (6") O/C: Total Outlets: (12) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Desktop Power Center. Color: Black. Receptacles: (3) 15 Amp, 125V, NEMA 5-15R. Additional: (2) USB Outlets. (6') Power Cord.

Category: Work Surface Power Centers

Non-Metallic, End Plate. Includes: (2) Outlet Identification Lables. Gray.

Category: Communication Module End Plates For Metallic Raceway

4000 Series Right angle turns on the same surface. Finish - Gray

Category: Large 2-Piece Metallic Raceway Elbows

Steel, 1-Gang, Duplex Receptacle Cover, 3000 Series. Length. Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, Combination Connector, 500, 700 Series. Size: 1-3/8" Width, 3" Length, 1-5/16" Height, 1/2" Trade KO. White.

Category: Metallic Raceway Connectors & Adapters

2000 Raceway Base and Cover, 5' Length, Steel, White

Category: Small 2-Piece Metallic Raceway Bases & Covers

Tele-Power Pole Accessory Pack. Includes: (2) Ceiling Trim Plates, (1) Hanger Clamp Assembly, (1) Feed End Fitting, For use with: 25dTP-4, AMDTP-4 Series.

Category: Tele-Power Pole Mounting Kits

Wiremold J60b0b20x 20amp outlet Center

Category: General Duty Power Strips

Available in two-gang sectional width. Provided with bezel to accept up to three (3) dual Wiremold CM Series Open System communication modules or Pass and Seymour Activate Connectivity System inserts. Modular inserts sold separately.

Category: 2-Gang Raceway Device Brackets & Plates

Ratchet-Pro 881 Series Multiple Service Floor Box Cover Kit, For 881 PVC Floor Box, Kit Complete With Prewired 20 Amp Duplex Receptacle (Receptacle Can Be Wired As Standard Receptacle or Isolated Ground), Flange And Slide Holder, 881ADP Adapter, and 881DIV Divider, Provided with Wiremold CM Series Open System Unloaded Adapters, Ortronics Series II and TracJack Adapters, Modular Jacks Sold Separately, CAUTION: Not For Use On Concrete Pours Less Than 4 1/2'' (114mm) Deep, Not For Use When Concrete Is The Finished Floor, Use Only For Tile, Carpet, Or Wood Covered Floors

Category: Round Recessed Box Covers

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Wiremold J60b2b20x 20a Rack mount Outlet Center

Category: General Duty Power Strips

6A opening with communication adapter on one side. Accommodates Wiremold Open System communication modules. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

The Wiremold Corduct 1200, 1400, and 1600 Series Overfloor Cable Protection Systems conceal wires and cords creating a smooth, trip-free surface instantly. Corduct can be applied to any flooring system with pressure-sensitive tape. Yellow

Category: Non-Metallic Overfloor Raceway

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Wiremold 3346e Alum Single recept Cover 1.40

Category: Plugmold Covers

For installation requiring a GFCI or surge suppression receptacle and accepts three (3) Wiremold CM2 Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately. Activation Cover 1dp 4comm - All Aluminum

Category: Round Recessed Box Covers

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

Feeds OFR Series Raceway. Has two (2) concentric 1/2" and 1 1/4" trade size KOs on end. Includes removable divider that can be positioned to feed any raceway channel. Can be used to feed raceway from wall or into furniture.

Category: Metallic Overfloor Raceway Connectors & Adapters

Aluminum, Cover, ALA4800 Series. Size: 5' Length, 0.078" Thickness. Satin Anodized Finish. Package Quantity: 8.

Category: Large 2-Piece Metallic Raceway Covers