"wiremold"

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: White. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Duplex Outlets.

Category: Single Circuit Tamper Proof Plugmold

Poke-Thru Assembly, Flush Furniture Feed, 4" Round, BlackPoke-Thru Assembly, Flush Furniture Feed, 4 Inch Round, Complete With One-Piece Finish Flange And Conduit Assembly with (1) 3/4 Inch and (1) 1-1/4 Inch Screw Plug Opening,Color: Black, For Use On tile/Carpet Floors

Category: Assembled Poke-Through Units

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BS) brass.

Category: Assembled Poke-Through Units

6" Diameter, Recessed Poke-Thru Device, Metallic, GrayPoke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Gray (Die Cast). Recessed: 3-1/4 Inch. Diameter: 6 Inch. Depth: 16-3/4 Inch. Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

Combination Box, 4-Compartment, Metallic, Depth: 3-7/16 Inch, Length: 12-3/4 Inch, Width: 10 Inch. Includes: (2) Receptacle Brackets. For use in Concrete Floor Applications. Floor cover is not included with box and needs to be purchased separately. ******DISCONTINUED******

Category: Recessed Compartment Boxes

P-THRU ASY FLUSH 4INComplete With One-piece Finish Flange And Conduit Assembly. Conduit Assembly Consists Of One 3/4 Inch And One 1 1/4 Inch Trade Size Conduit. Finish Cover Flange Provided With One 3/4 Inch And One 1 1/4 Inch Trade Size Screw Plug Opening. Colors Available In Painted Gray

Category: Assembled Poke-Through Units

Aluminum Tamper-resistant GFCIAluminum, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Aluminum. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

PVC CUTTER REGULAR DUCTRegular duty cutter. Ideal for use with small, nonmetallic raceways.

Blank Faceplate. Covers seam where two sections of DS4000C come together. Finish - Black

8IN CORE-UNWIRED-Recessed Assembly With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8" (203mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Diecast aluminum cover assembly Finish: (BS) brass.

Category: Poke-Through Cover Assemblies

Pass and Seymour 20A duplex receptacle with 6" (152mm) lead wires pre-installed on a bracket into DS4000 Series Raceway in a downward facing, protected position. Black

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Anodized Aluminum

Category: Square / Rectangle Recessed Box Covers

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Black

Category: Square / Rectangle Recessed Box Covers

8" Poke-Thru Device, Recessed, Evolution Series, Nickel8" Poke-Thru Device, Recessed Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Recessed: 3-1/4", No Device: Communication, or A/V Capability, Color Nickel, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (9) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Designed to provide a solid secure panel to protect the audio/video equipment loaded within the enclosure. Panel is designed to work with the ECB2S, ECB2S-CR, and ECB2SRLNK boxes and is powder coated white to match the enclosure. The panels are field paint-able to match the room decor. Includes a lock and key.

Category: Frame & Rack Panels

Aluminum flush style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished black (BK)

Category: Square / Rectangle Recessed Box Covers

Extra long coupling allows attachment to a wall box or to a back feed DS4000 Series Raceway from 1" or 1 1/4 trade size conduit.

Steel, Tee Fitting, 2100 Series. Size: 4" Length. Ivory.

Pass and Seymour 20A duplex receptacle with 6" (152mm) lead wires pre-installed on a bracket into DS4000 Series Raceway in a downward facing, protected position. Designer Ivory

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

8" Poke-Thru Device, Recessed, Evolution Series, Brass8" Poke-Thru Device, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist Open. Recessed: 3-1/4", No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, Depth: 16-3/4, For Tile, Laminate and Wood Flooring.

Category: Assembled Poke-Through Units