"wiremold"

2-Gang, Upper Panel Device Plate, Metallic, Device Type: Duplex Receptacle. For use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

3-Compartment Combination Box, Metallic, Depth: 5", Length: 8-3/4", Width: 6-3/4". Raised Floorbox, Series AF, Color: Black Tile Cover & Trim.

Category: Recessed Compartment Boxes

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Poke-Thru Device Retrofit Kit, RC3 Series, Color: Black Flange. Diameter: 7-1/2". Upgrade for Carpet Flooring, Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) and Duplex Receptacle Barrier.

Category: Assembled Poke-Through Units

Floor Box, Rectangular, (4) Compartment, Depth: 5 Inch, 1/2 & 3/4 Inch Knockouts, Housing: Die Cast Aluminum, Gray Tile Lid.

Category: Recessed Compartment Boxes

Poke-Thru Insert Assembly, RC4 Series, No Cover w/ Disposable Plate, Device Type: (4) 20 Amp Receptacles, For Use with Tile, Carpet or Wood Flooring, Use with RC4C Cover Assemblies.

Category: Assembled Poke-Through Units

W-mold Sct-h Single Gang plate For Heyco Bush/opening

Category: Recessed Floor Box Service Fittings

Internal Duplex Receptacle Bracket, Accepts 15A & 20A Duplex Receptacles

Category: Recessed Floor Box Service Fittings

Device Plate, 1-Gang, Accepts (3) Ortronics TracJack Inserts

Category: Recessed Floor Box Service Fittings

18X6X10' WIREMOLD GUTTER

Unit is 13" [330.2 mm] and has one 15A gray duplex with adapter for Ortronics TracJack & Series II or Wiremold open system. Does not have communications opening.

Category: Work Surface Power Centers

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

WIREMOLD WMFB1SRN NICKEL FLOO

Category: Assembled Recessed Gang Boxes

Wiremold S1mc Mud Cap

Category: Octagon Metallic Box Mud Rings

All communication floor boxes accept up to four UTP connectors. Flush poke-thru-style flanges available. Slide covers match painted flange colors. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu. cm.) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Includes two (2) Ortronics TracJack inserts, two (2) Ortronics Series II adapters and two Wiremold Open System adapters. Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Modular jacks sold separately. Black

Category: Assembled Recessed Round Boxes

2A opening. Includes adapters for Ortronics TracJack, Series II, Wiremold CM2 Series inserts, Pass and Seymour Activate and other manufacturers.

Category: Large 2-Piece Metallic Raceway Cover Plates

<p>Faceplate with 6a mini adapter for Wiremold Open System CM2 communication modules.</p>

Category: Recessed Floor Box Service Fittings

Wiremold 7712uldb20-tl 77" 12out 20a 15ft. Crd W/ Locking Plug

Category: Commercial Grade Power Strips

Two-gang powder-coated aluminum combination carpet and tile flange, 6" x 9" (152.4mm x 228.6mm). Accepts Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series Open System inserts, sold separately. NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Bronze

Category: Square / Rectangle Recessed Box Flanges

Mini Adapter Cover Plate, For ALA3800 Series, Material: Aluminum, Length: 12 Inches, Accepts One (1) Wiremold CM2 Series Communication Connectivity Device. Includes Cover and 2A Mini Adapter, (2A-Opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloadedadapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Black"

Category: Assembled Recessed Round Boxes

Wmdm5bz Wiremold 5 Outlet computer Grade Surge

Category: Commercial Grade Power Strips

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes mini adapter that accepts Pass and Seymour Activate inserts or Wiremold Open System communications modules. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 4-Gang Raceway Box Covers