"wiremold"

WMD ECB2SP-RLNK CEILING BOX R

Category: Media Center Enclosures with Covers

Internal Communication Bracket, (2) Adapters, Aluminum, For RFB2 Series

Category: Recessed Floor Box Service Fittings

Wlk 838tal-880s3 838tal-880s3

Category: Square / Rectangle Recessed Box Flanges

Floor Box Cover Plate, Type: 20A/30A Single Locking Receptacle, Flip Lid, Material: Brushed Aluminum, For Use With OmniBox™ Series Floor Boxes.

Category: Square / Rectangle Recessed Box Covers

Cast Iron Floor box, Knoutouts: (2) 1/2 in, (2) 3/4 in, Adjustment: 2 in (PrePour), 1/2 in (PostPour), Cubic Inch: 24.7 in

Category: Recessed Adjustable Floor Boxes

OFR Extron MAAP-2A Combo Device Plate, Steel. Combination Device Plate That Will Accept Up To Two (2) Extron Electronics MAAP-Style Plates and Up To Two (2) Ports of Communications Devices. Includes Adapters For Ortronics Tracjack, Series II, Pass and Seymour Activate Inserts and Wiremold Open System Communication Modules.

Category: Metallic Overfloor Raceway Device Plates

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft., Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Plug-In Outlet Center Unit, Length: 24 Inch, 15' Cord, 8 Outlets, Lighted Switch.

Category: Work Surface Power Centers

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Floor Box Cover, 1-Gang, Communication Cover Plate, Cover Type: Single Service (2-5/8 Inch or 1 Inch Opening), Device Type: Communication Cable, Brass

Category: Square / Rectangle Recessed Box Covers

Single Gang Cover for Tele-Power Pole, Steel, Ivory, Accepts up to 30 Amp Shallow-Style Device & Flushplate - G3007C Device Bracket Included

Category: Power Pole Covers

Keystone Jack Plate, Black, Wiremold Audio/Video Interface Plates (AVIP) Allow For A/V Connectivity in All Wiremold A/V Compatible Pathways. AVIP Series Device Plates are Metal and have Screwed-Down Connectors, Which Ensure a Secure Connection that Cannot be Easily Pulled-Out or Disconnected While in Use. Available in Data, Audio, and Video Versions, AVIP Series Device Plates Help You Stay Connected In Meeting and Training Rooms, Collaboration Spaces, or Work Areas.

Category: Poke-Through Mounting Plates

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.

Category: Snap-In HDMI Jack Inserts

WIREMOLD AV7004BK

Category: Poke-Through Mounting Plates

All communication device accepts up to four UTP connectors. Finished with a brushed brass flange and a black device plate. Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Fiber storage loop. Accepts two CM2 size Wiremold Open System communication modules or Pass and Seymour Activate Series inserts. Compatible with Wiremold 400, 800, and 2300 Series Raceways. White

Category: 2-Gang Raceway Device Brackets & Plates

For mounting up to four power and communication devices at one location. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

WIREMOLD S2048 SINGLE BOX

Category: 1-Gang Raceway Device Boxes

W-mold 630c Cover Cutter 3000

Category: Raceway Tools

WIREMOLD 7712BCS SURGE STRIP

Category: Commercial Grade Power Strips

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

For mounting up to three power or communication devices at one location inline and offset with 5400 Series Raceway. For use with 5507 Series Faceplates, Ortronics TracJack and Series II Modules, Pass and Seymour Activate Series Inserts, Wiremold Open System Communication Modules. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules. S2-EPL End Plates are required when using Orthonics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 3-Gang Raceway Device Brackets & Plates

For mounting up to three power and communication devices with the 5500 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Base Cutter 3000

Category: Raceway Tools