"wiremold"

Makes right angle turns around internal corners of 2900 Series Raceway running at right angles. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

1" (25mm) I.D. grommeted opening. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Available in two-gang sectional width. Provided with one opening to accept one Ortronics TracJack bezel and one Ortronics Series II bezel. Will accept up to six Ortronics TracJack devices or up to three dual Ortronics Series II modular inserts. Modules sold separately.

Category: 2-Gang Raceway Device Brackets & Plates

Accepts GFCI receptacle and only Ortronics datacom inserts. Supplied with both adapters to accommodate two TracJack devices or one Series II device. For AL5200 Series Raceway. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway Cover Plates

To connect S4000 Series Raceway with surface type panel boxes. Accommodates maximum wire capacity of S4000 Series Raceway. Separate C-shaped flange fits around raceway, covering any irregularities from cutting into box. Cut 4 3/4" x 1 3/4" [121mm x 44mm] hole in panel box.

Category: Recessed Floor Box Service Fittings

Adjustable Floor Box, 3-Gang, Depth: 2-15/32 Inch, Steel, Cubic Inches: 126, (11) 1/2 Inch and (11) 3/4 Inch Conduit Openings

Category: Square Recessed Floor Boxes

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (12) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

Sentrex high performance surge protection. Five outlets, lighted switch, durable putty white aluminum housing, 15A. Receptacles rotated 90 degrees and spaced to accommodate transformers. Length 24" (610mm). 6' (1.8m) 14/3 SJT putty white cord with NEMA5-15 plug. Snap-on, slide-off mounting.

Category: Commercial Grade Power Strips

Kit comes complete with adapter ring to secure into the boxes, (1) 3/4" trade size screw plug and conduit fitting for power, 1-1/4" trade size screw plug and conduit fitting for low voltage (communications or Audio/Video) services.

Category: Round Recessed Box Covers

Complete plug assembly for abandoning an open 3" (76mm) diameter hole. Assembly includes intumescent fire-stop material to maintain the fire classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black die-cast aluminum cover.

Category: Round Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. TR indicates tamper-resistant version secured with tamper-resistant screw. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Flush with floor, cast aluminum cover assembly available in brushed aluminum (AL), black (BK), and gray (GY). Maximum load capacity 3,000 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications.

Category: Square / Rectangle Recessed Box Covers

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Brass

Category: Square / Rectangle Recessed Box Covers

Available in die cast aluminum with a painted black (BK), brass (BS), nickel (NK), bronze (BZ) or gray (GY) finish. No cutouts are provided for floor coverings. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Finish - Black

Category: Round Recessed Box Covers

Tele-Power Pole, Two-Compartment, Nominal Thickness: 0.50 Inch, Length: 10 Feet 5 Inches, Factory Wired with (1) 20 Amp, 125 Volt Dedicated/Isolated Ground Duplex Receptacle and (1) Standard 20 Amp, 125 Volt Duplex Receptacle, Opening for Communication and 1/2 Inch Hole for Power is Provided at Top, 8 Inch Cover at Top Front of Pole is Removable For Making Power Wiring Connections.

Category: Aluminum Power Poles

Accepts all standard tHREE-gang NEMA faceplates and keystone jacks. Twistouts on all four sides for PN03, PN05, and PN10 Series Raceways. Has 1/2" and 3/4" concentric trade size KOs, as well as rectangular KO for wall box mounting. Designed for use with Ortronics WiJack Wireless Access Point.

Category: 3-Gang Raceway Device Boxes

Single-gang device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Used for touching up large areas. Contains 12 oz. of paint. NOTE: Can only be shipped via ground transportation. Gray

Two-compartment extender mounts onto existing 25DTP or 25DTC Series pole. Nominal material thickness .040" (1.0mm). Furnished unwired without outlets. Use existing pole mounting hardware, entrance end plate and ceiling trim plate. Available in 5' (1.524m) length. Can be cut to desired length. Finish - Gray

Category: Steel Power Poles

Single Receptacle Cover Plate – 2.13" [54mm] diameter. For straight blade or locking single receptacles. Mounts commercially available straight blade or locking single receptacles with face diameters of 2.13" (52mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Stainless Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Stainless Steel. Outlets (6") O/C: Total Outlets: (11) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

One-gang powder-coated aluminum tile flange, 4.5" x 3.5" (114mm x 89mm). For use on 880S1, 880M1, 880CS1-1, and 880M1-1 Floor Boxes. NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Bronze

Category: Square / Rectangle Recessed Box Flanges

Brushed aluminum cover plate with two screw plug openings, 5 1/2" [140mm] for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service.

Category: Round Recessed Box Covers