"wiremold"

4-1/4" Round Cover, Metallic, Cover Type: Brass or Aluminum cover plate (1/2" Opening). Device Type: Communications or Power Cover Plate. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Single-gang device plate that will accept up three (3) Ortronics Series II dual modular inserts. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Eleven 20A outlets with t-slots, 6' (1.8m) cord. Length 70" (1.8m). Receptacle center-to-center 6" (152mm). 20 Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: Commercial Grade Power Strips

Flush with floor, cast aluminum cover assembly available in brushed aluminum (AL), black (BK), and gray (GY). Maximum load capacity 3,000 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications.

Category: Square / Rectangle Recessed Box Covers

Available in die cast aluminum with a painted black (BK), brass (BS), nickel (NK), bronze (BZ) or gray (GY) finish. No cutouts are provided for floor coverings. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Finish - Black

Category: Round Recessed Box Covers

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Brass

Category: Square / Rectangle Recessed Box Covers

Sentrex high performance surge protection. Six outlets, lighted switch, durable putty white aluminum housing, 15A. 15' (4.6m) 14/3 SJT putty white cord with NEMA5-15 plug. Length 15 1/4" (387mm). Snap-on, slide-off mounting.

Category: Commercial Grade Power Strips

Abandonment available in black (BK) or gray (GY). NOTE: To abandon the RC7 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Poke-Through Cover Assemblies

Unit includes one (1) 20A black tamper-resistant duplex receptacle. Unit comes with a 6' [1.83m] cord. Comes with a brushed stainless steel finish.

Category: Assembled Recessed Countertop Boxes

Poke-Thru Device Retrofit Kit, RC3 Series, Color: Gray Flange. Diameter: 7-1/2". Upgrade for Carpet Flooring, Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) and Duplex Receptacle Barrier.

Category: Assembled Poke-Through Units

Adjusting ring (with three adjusting screws) for use with 437 Attaching Rings - power for brass fitting only. 3 25/32" (96mm) O.D.

Category: Recessed Floor Box Service Fittings

Steel, Fixture Box with Solid Base, 500, 700 Series. Size: 6-3/8" Diameter, 1" Depth. Includes: (4) Holes for Fixture Studs, (5) 1/2" Trade Size KOs. White.

Category: Round Raceway Solid Base Boxes

Makes transition from 40N2 Series Raceway to PN03, PN05 and PN10 Series Raceways. Ivory

Feeds 2400 Series Raceway. Has 3/4" and 1" concentric trade size KOs located on each side. Fog White

For 90 degree tee connection at any point along a run of 6000 Series Raceway. Finish - Gray

Aluminum Raceway Internal Corner Coupling, Connects 2 Raceway Sections to form an internal 90° turn in a raceway run.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Two duplex receptacle brackets, receptacle insulators,power grommets, and bend radius control grommets. For use with recessed activations. Communication brackets ordered separately. Galvanized Steel

Category: Recessed Floor Box Service Fittings

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 5 Duplex Receptacle, Size: 5' Length, IG Finish, Color: Ivory.

Category: Single Circuit Steel Plugmold

Two-Compartment Pole, Nominal Material Thickness: 0.04" (1.0mm), Gray or Ivory Boot Base, Furnished, Unwired without Outlets, Mounting Hardware, Entrance End Plate and Ceiling Trim Plates Furnished, Length: 10' 4"

Category: Steel Power Poles

Nonmetallic Plugmold 6' in length with receptacles spaced 12" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

Non-Metallic, 1-Gang, Large Data Box, Series: Eclipse PN03, Pn05, PN10. Size: 3-5/8" Height, 2-7/8" Width, Color: Ivory. Surface Mount Box for Raceway or Standalone application. Accepts 1 front-loaded downward facing device

Category: 1-Gang Raceway Device Boxes

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). Gray Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 12' 5" (3.8m)

Category: Steel Power Poles

Makes right angle turns around external corners of 2800 Series Raceway. Maintains 1 1/4" (32mm) cable bend radius when installing UTP and fiber optic cable. Ivory

Category: 1-Piece Non-Metallic Raceway Elbows