"wiremold"

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Nonmetallic Plugmold 6' in length with receptacles spaced 18" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

Seam Clip Fitting, DS4000 Series, Steel, Black, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Makes transition from 40N2 Series Raceway to PN03, PN05 and PN10 Series Raceways. Ivory

Feeds 2400 Series Raceway. Has 3/4" and 1" concentric trade size KOs located on each side. Fog White

For 90 degree tee connection at any point along a run of 6000 Series Raceway. Finish - Gray

Includes two (2) adapters to accept Ortronics TracJack devices, and two (2) adapters to accept Ortronics Series II devices (sold separately). NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

Covers the seams where two lengths of 2400 Series Raceway come together (nonmetallic). Fog White

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. White

Category: 2-Piece Non-Metallic Raceway End Fittings

Sentrex high performance surge protection. Six outlets, lighted switch, durable putty white aluminum housing, 15A. 6' (1.8m) 14/3 SJT putty white cord with NEMA5-15 plug. Length 15 1/4" (387mm). Snap-on, slide-off mounting.

Category: Commercial Grade Power Strips

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts. Finish - White

Category: 2-Gang Raceway Device Boxes

Eight (4 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

Eight 20A, 120V, 60Hz, 2500 watt outlets, lighted switch, putty white aluminum housing, 6' (1.8m) 12/3 SJT black cord with NEMA5-20 plug. Length 17 1/4" (438mm). Receptacle center-to-center 1 1/2" (38mm). Snap-on slide-off mounting.

Category: General Duty Power Strips

<p>1/2"" (12mm) high extension. Used to increase height of preset or afterset. Die cast construction. Attach to preset or afterset with push on metal sleeves (included). Cannot be stacked.</p>

Category: Recessed Floor Box Service Fittings

Allows outer compartments to be adapted to accept any of the 68 device plates. One 68DB is required to mount two 68 device plates in each outer compartment.

Category: Poke-Through Mounting Plates

Raceway Fiber Bushing, 2600 Series, Steel, Protects Wires from Abrasion. Bushing Slips Into Open End of 2600 Where It Enters a Fitting

Category: Metallic Overfloor Raceway Clips & Couplings

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter 6 Inch, Depth 16-1/4 Inch, Black, The unit comes with a surface style cover, and three (3) empty compartments that are recessed 4" below the floor surface level.

Category: Assembled Poke-Through Units

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Gray

Category: 2-Piece Non-Metallic Raceway End Fittings

Accepts up to four (4) NEMA standard decorator style devices from most manufacturers.

Category: Midway & Oversized Decorator Wallplates

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color plated brass.

Category: Assembled Poke-Through Units

Twelve (6 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers