"wiremold"

Wire Connector, Pressure Type, 12 - 14 AWG, Maximum 4 Conductors

Category: Plugmold Wire Connectors

WIREMOLD 25DTP-415BK

Category: Steel Power Poles

For mounting power and communication devices in-line with 5400 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series Inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II Inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Non-Metallic, Base Seam Clip, 5400 Series. Size: 1-3/4" Length, 7/8" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Steel, 2-Gang, Utility Box, 3000 Series. Size: 1-7/8" Depth. Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, Cover Clip, 3000 Series. Size: 2-13/16" Length, 3/4" Width. Ivory.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

WMD XB814C520BN EXTERIOR BX C

HDMI Female to Female Barrel, Wiremold Audio/Video Interface Plates (AVIP), Allow For A/V Connectivity in All Wiremold A/V Compatible Pathways. AVIP Series Device Plates are Metal And Have Screwed-Down Connectors, Which Ensure a Secure Connection that Cannot Be Easily Pulled-out or Disconnected While in Use. Available In Data, Audio, And Video Versions, AVIP Series Device Plates Help You Stay Connected in Meeting and Training Rooms, Collaboration Spaces, Or Work Areas.

Category: Snap-In HDMI Jack Inserts

Adjustable Floor Box, 1-Gang, Steel, Depth: 2-15/32". Cubic Inches: 37". Knockouts: (5) 1/2" & (5) 3/4". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour)

Category: Recessed Adjustable Floor Boxes

Device Mounting Plate, Type: Blank, Metallic, Used to Blank Off Either of the Side Compartments When No Devices or Cabling Are To Be Used.

Category: Poke-Through Mounting Plates

Brushed aluminum GFI cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). May be used with Wiremold CM Series adapters and Ortronics Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate. Other device plates sold separately. 2-Compartment Shallow Stamped Steel Recessed Box w/tunnel,1 Duplex Bracket and 1 Comm Bracket

Category: Recessed Compartment Boxes

1-Gang, Floor Box Cover, Non-Metallic, Cover Type: Dual Service. Device Type: Communication Cable. Color: Brass.

Category: Square / Rectangle Recessed Box Covers

Flush Poke-Thru Recessed Furniture Feed Assembly with Surface Style Cover. Size: 16-3/4" Height. Recessed 3-1/4" Below Floor Surface. Includes: (1) 3/4", (1) Concentric 2"-1-1/4" Screw Plug Opening, (3) Gang. For use with: 6" Diameter Cored Hole. Black Die-Cast Aluminum Cover.

Category: Assembled Poke-Through Units

Cover Plate Flange, 1-Gang, Non-Metallic, Brown. W x L: 4-3/4 x 5-3/4 Inch. For use with: 829PFLRT, 829PFL Covers and Accepts MAB6TJ, MAB3S2, CM-MAB and CM Series Inserts in Carpet and Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Non-Metallic, End Plate. Includes: (2) Outlet Identification Labels. Ivory.

Category: Communication Module End Plates For Metallic Raceway

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Black

Category: Round Recessed Box Covers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately. Black

Category: Round Recessed Box Covers

Non-Metallic, 6A, Mini Adapter Bezel Opening. Ivory.

Category: 1-Gang Raceway Box Extension Adapters

4-1/4" Round Cover, Metallic, Cover Type: single door. Device Type: Duplex Receptacle. Color: Brushed Aluminum. For use in Carpet Applications.

Category: Round Recessed Box Covers

Upper Panel Device Plate, 1-Gang, Metallic, Blank. For Use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

Device Plate, 1-Gang, Device Type: Duplex Receptacle, Metallic, For use in the center compartment only.

Category: Poke-Through Mounting Plates

Service Fitting, Type: 4-Piece, Duplex Receptacle 20A/125V on Both Sides, Material: Aluminum, For Use With Wiremold® 525 Series Service Fittings.

Category: Recessed Floor Box Service Fittings

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Brass, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes