"wiremold"

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - White

Category: 1-Piece Non-Metallic Raceway Elbows

Blank Plate, Length: 12 Inch, Width: 4 7/8 Inch, Aluminum; Satin Anodized; Approval UL, CUL. Used On AL5200 Series Aluminum Raceway

Category: Large 2-Piece Metallic Raceway Cover Plates

Ortronics AB2TJ TracJack and ABS2 Series II adapters included. NOTE: For RFB4 Series Floor Box side compartment only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Surface mount box for use with Eclipse Raceway or standalone application. Has 1/2" trade size KO. Accepts two front-loaded downward facing Ortronics TracJack inserts. White

Category: 2-Gang Raceway Device Boxes

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Non-Metallic External Elbow Fitting, 5500 Series, White. 90° External Corner with Integral Dividers That Provide a 2" (51mm) Cable Bend Radius for UTP and Fiber Optic Installations.

Category: 2-Piece Non-Metallic Raceway Elbows

90 degree flat corner, with integral dividers, that provides a 2" (51mm) cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

6' Plugmold Multioutlet System with 8 single outlets 12 inches apart, GBA Finish - Ivory

Category: Single Circuit Steel Plugmold

Unit complete with link straps, adapter plate and features concentric screw plugs that allow for 1 1/4" or 2" trade size conduit fitting connection. Gray

Category: Round Recessed Box Covers

Eight outlets, rugged gray aluminum housing, 15A, lighted switch. 15' [4.6m] 14/3 SJT black cord with NEMA5-15 plug. Length 15" [381mm]. Receptacle center-to-center 1 1/4" [32mm]. Snap-on, slide-off mounting.

Category: General Duty Power Strips

Steel, Power/Data Pole, Color: Gray, 10' 5", (2) Duplex Outlets, 20A, 125V, (1) Dedicated/Isolated & (1) Standard Outlet, Removable Cover with KO's for Data Connectors.

Category: Steel Power Poles

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Bronze

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Device, 8 Inch Diameter, Prewired, (2) 20A Duplex Receptacles, (1) 1/2 Gang Blank Housing, (3) 1 Gang Pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider Included

Category: Assembled Poke-Through Units

Barrier Kit, Used To Separate Power and Communication Wires in Partition Feed Covers, Supplied With Base and Three Extensions To Adjust To Cover Height. For Use With RFB2, RFB2-OG, RFB2-SS, RFB4 and RFB4-SS Floor Boxes.

Category: Recessed Floor Box Service Dividers

Non-Metallic, Prewired Plugmold, Length: 4 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (4) 15A, 125V: Single Circuit, Duplex Outlets.

Category: Single Circuit Non-Metallic Plugmold

For making a 90 degree external turn in a raceway run. Includes two ALA01 Couplings.

Combination Box, 3-Compartment, Metallic, Depth: 5 Inch, Length: 8-3/4 Inch, Width: 6-3/4 Inch. Raised Floorbox, Series AF, Color: Black Carpet Cover & Trim.

Category: Recessed Compartment Boxes

Non-Metallic, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (18") O/C: Total Outlets: (4) 15A, 125V: Single Circuit, Duplex Outlets.

Category: Single Circuit Non-Metallic Plugmold

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Gray

Category: 2-Piece Non-Metallic Raceway End Fittings

Accepts up to four (4) NEMA standard decorator style devices from most manufacturers.

Category: Midway & Oversized Decorator Wallplates

Twelve (6 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

Complete cover and stem assembly. The flange is a one-piece design with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Finished color plated brass.

Category: Assembled Poke-Through Units

Flush Style Cover Assembly with Floor Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

Use as blank cover or tap off KO in center of plate for 1/2" trade size conduit. G3007C Device Bracket included. Ivory

Category: Small 2-Piece Metallic Raceway Covers