"wiremold"

Surface mount box for use with Eclipse Raceway or standalone application. Accepts one front-loaded downward facing Ortronics Series II insert. White

Category: 1-Gang Raceway Device Boxes

Exterior-gang 3/4" trade size conduit service feed assembly. Designed to allow connection to 3/4" trade size conduit feed in one (1) of the four (4) exterior-gang locations.

Category: Recessed Floor Box Service Fittings

Eight 20A outlets with t-slots, 15' (4.6m) cord. Length 20" (508mm). Receptacle center-to-center 1 1/4" (32mm). 2- Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: Work Surface Power Centers

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and nickel cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

Allows 4000 Series Raceway to cross over existing 4000 Series Raceway. Ivory

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Poke-Through Device, Prewired, 4 Inch Diameter, (2) 20 Amp Duplex Receptacles, (10) 1-1/2 and 3/4 Inch Knockouts, NEMA 5-20R, 125 Volt, Gray

Category: Assembled Poke-Through Units

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 5 Duplex Receptacle, Size: 5' Length, IG Finish, Color: Ivory.

Category: Single Circuit Steel Plugmold

Floor Box Cover Kit, Rachet-Pro 881 Series, Single Service. Includes: 15A Quad Receptacle, Flange, 881ADP Adaptor, 881DIV Divider. Use with Tile, Carpet, Wood Floors. Color: Aluminum.

Category: Round Recessed Box Covers

Available in 3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.

Category: Dual Circuit Steel Plugmold

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

<p>Installed either before or after concrete pour to create activation from duct. NOTE: Drill a 2 1/2'' (64mm) hole in concrete and a 2 1/4'' (57mm) hole in duct.</p>

Category: Recessed Floor Box Service Fittings

Floor Box, Raised 2-1/2", Size: 9-1/8 x 11 inch, Accomodates (2) Duplex Receptacles and (6) Communication Devices, Knockouts: (4) 1/2 Inch Concentric, (3) 1/2 Concentric, Polycarbonate Lid, Black

Category: Assembled Recessed Gang Boxes

For hanging fixtures, smoke/fire alarms and other security devices with 3 1/2" (89mm) or 4 1/16" (103mm) mounting centers. 5 1/2" (140mm) diameter with open base. Not for use with fans. White

Category: Round Raceway Extension Boxes

Open Architecture Device Mounting Bracket and Trim Ring. Finish - Ivory

Seam Clip Fitting, DS4000 Series, Steel, White, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Nickel

Category: Square / Rectangle Recessed Box Covers

Device plate that will accept up four (4) Ortronics Series II dual modular inserts. For use in the center compartment only. Devices supplied by others.

Category: Recessed Compartment Box Device Plates

Raceway Back Feed Fitting, 2400 Series, Steel, White, 1/2" Trade Size Male Bushing and Lock Nut Washer for Grounding

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For butting two raceway sections to form an internal 90 degree turn in a raceway run.

Plugmold Multi-Outlet System, 10 Single Outlets, 304 Stainless Steel, Length: 5 Feet.

Category: Single Circuit Tamper Proof Plugmold

Exterior-gang 1 1/4" trade size conduit service feed assembly. Designed to allow connection to 1 1/4" trade size conduit feed in one (1) of the four (4) center-gang locations.

Category: Recessed Floor Box Service Fittings

For AC8840 and AC8104 Boxes. Includes two (2) Ortronics Series II adapters and two (2) TracJack adapters. NOTE: AC8840 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Flat Tee with Coupling, For Branch Connections of Two Runs of ALA4800 Series Raceway. Size/Dimensions: 9 Inches, Material: Aluminum, Includes Six ALA01 Couplings.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Replacement trim flange and decorative cover assembly for the EFSB2 and EFSB4 wall boxes. Trim flange and cover are finished in a decorative white color, with a paintable surface to match any room décor.

Category: Recessed Compartment Box Covers