"wiremold"

Reducing Connector Fitting, For Transitioning From 800 Series Raceway To 400 Series Raceway. White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, Latching Raceway, 2900 Series. Size: 8' Length, 1-1/2" Width, 3/4" Height. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway

Cover Clip, Covers Seams Where Sections of ALAC-5 Cover Come Together

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Power Pole, Two Compartment, Aluminum, (2) Duplex Receptacles, 20 Amp, 125 Volt, 2-1/4 In Wide, 2-5/16 In Deep, 15 Ft, 5 In Long, Satin Anodized Finish, Includes Entrance End Plate and Ceiling Trim Plate

Category: Aluminum Power Poles

Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

WIREMOLD AAPCTM4

Category: Metallic Raceway Connectors & Adapters

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

Pas Ala-lpb Low Profile Bezel cover Plate For Activate

Non-Metallic, Tee Fitting, 2000 Series. Size: 4-1/2" Length, 1-7/8" Width. PVC, Black.

Category: Small 2-Piece Metallic Raceway Tee Fittings

Heavy Duty Surface Style Cover Assembly With Flip Lid, 8 Inch Diameter, Stainless Steel

Category: Round Recessed Box Covers

Non-Metallic, FiberReady 2" Radius Full Capacity Flat Elbow, 2300 Series. Size: 5-1/2" Length, 5-1/2" Width. PVC, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Steel, Flat Elbow, 2400 Series. Size: 1-29/32" Width, 3-15/16" Length Ivory

Category: Small 2-Piece Metallic Raceway Elbows

Non-Metallic, Entrance End Fitting, 5000 Series. Size: 3-9/16" Length, 5-1/16" Width, 1-15/16" Depth. PVC, White.

Category: 2-Piece Non-Metallic Raceway End Fittings

Non-Metallic, 1-Piece Raceway, PN10 Series. Size: 8' Length, 1-11/16" Width, 13/16" Height. PVC, White

Category: 1-Piece Non-Metallic Raceway

Poke-Thru Device Furniture Feed Cover Assembly, 4 Inch Diameter, 2 Gang, 3/4 and 1 1/2 Inch Screw Plug Openings, Die Cast Metal, Black, For Use With Concrete, Carpet, Tile, and Wood Floors

Category: Assembled Poke-Through Units

Non-Metallic, 1-Piece Raceway, PN05 Series. Size: 8' Length, 1-1/8" Width, 5/8" Height. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway

6 Inch Poke-thru Device, Pre-Wired A/V Surface Style Assembly , Depth 16 1/4 Inch, Includes (1) 20 Amp Duplex Receptacle, Multiple Low voltage and AV Device Plates, Black Aluminum Cover

Category: Assembled Poke-Through Units

6' Plugmold Multioutlet System with 4 single outlets 18 inches apart, GB Finish - Gray

Category: Single Circuit Steel Plugmold

3' Steel Plugmold Multioutlet Strip with 3 duplex receptacles spaced at 12", GBA Finish - Ivory

Category: Dual Circuit Steel Plugmold

Cross throuhgh connection in a raceway run. Includes four pairs of AL5201 Couplings.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, Latching Raceway, 2800 Series. Size: 8' Length, 1" Width, 1/2" Height. PVC, Fog White.

Category: 1-Piece Non-Metallic Raceway

Surface Style Cover with Solid Lid, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

Accepts standard 15A and 20A duplex receptacles. NOTE: Standard size for device plates for Plate Location 2 is 5 7/32" (132mm) x 2 3/4" (62mm). Galvanized Steel

Category: Recessed Floor Box Service Fittings

Connects 4000 Series Raceway to 2400 Series Raceway.