"wiremold"

Connects a vertical run of AL5200 Series Raceway with a horizontal overhead run with its cover facing up.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Kit Comes Complete With Adapter Ring To Secure Into The Boxes, 1-1/4 / 2" Concentric Screw Plug Closure Plug, Conduit Fittings Sold Separately By Others

Category: Round Recessed Box Covers

Seam Clip Fitting, DS4000 Series, Steel, Gray, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Device Cover for AL3000 Series Raceway, Duplex 5-20R

Category: Large 2-Piece Metallic Raceway Cover Plates

Eleven outlets with t-slots. 6' (1.8m) cord. Length 70" (1.8m). Computer grade surge protection, 20 Amps.

Category: Commercial Grade Power Strips

Non-Metallic, Flexible Corduct. 1600 Series. Size: 25' Length, 3-11/32" Width, 30/32" Height. Color: Beige.

Category: Non-Metallic Overfloor Raceway

Poke-Thru Device Assembly, 1-1/4" and 2" Conduit Openings and Closure Plugs, Color/Finish: Brass

Category: Assembled Poke-Through Units

Non-Metallic, 2A, Single Unloaded Systimax Module. Black.

Category: Keystone Modules For Metallic Raceway

Non-Metallic, Switch Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, 2A, Single Unloaded Systimax Module. White.

Category: Keystone Modules For Metallic Raceway

Steel, 1-Gang, Single Receptacle Cover, 5500 Series. Size: 1.59" Diameter. Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Tee Fitting, PN10 Series. Size: 2-11/16" Length, 5-5/16" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Makes 90 degree external corners. Two AL2401 Couplings included.

Category: Small 2-Piece Metallic Raceway Elbows

<p>Six outlets, rugged gray aluminum housing, 15A. 6' (1.8m) 14/3 SJT black cord with NEMA5-15 plug. Length 12 1/4'' (311mm). Receptacle center-to-center 1 1/4'' (32mm). Snap-on, slide-off mounting.</p>

Category: General Duty Power Strips

For mounting four CM2 Series modules or Pass and Seymour Activate Series devices modules.

Category: Communication Module Adapters For Metallic Raceway

Non-Metallic, Dual RJ11/RJ45 Connector Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. Includes: (1) Opening, (1) KO. PVC, Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Drop Ceiling Connector, 2900 Series. Size: 2-7/8" Length, 2" Width. PVC, Fog White.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Reducing Connector Fitting, For Transitioning From 800 Series Raceway To 400 Series Raceway. White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, Latching Raceway, 2900 Series. Size: 8' Length, 1-1/2" Width, 3/4" Height. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway

Cover Clip, Covers Seams Where Sections of ALAC-5 Cover Come Together

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Power Pole, Two Compartment, Aluminum, (2) Duplex Receptacles, 20 Amp, 125 Volt, 2-1/4 In Wide, 2-5/16 In Deep, 15 Ft, 5 In Long, Satin Anodized Finish, Includes Entrance End Plate and Ceiling Trim Plate

Category: Aluminum Power Poles

Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

Pas Ala-lpb Low Profile Bezel cover Plate For Activate