"wiremold"

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

Non-Metallic, Entrance End Fitting, 5000 Series. Size: 3-9/16" Length, 5-1/16" Width, 1-15/16" Depth. PVC, White.

Category: 2-Piece Non-Metallic Raceway End Fittings

Non-Metallic, 1-Piece Raceway, PN10 Series. Size: 8' Length, 1-11/16" Width, 13/16" Height. PVC, White

Category: 1-Piece Non-Metallic Raceway

Poke-Thru Device Furniture Feed Cover Assembly, 4 Inch Diameter, 2 Gang, 3/4 and 1 1/2 Inch Screw Plug Openings, Die Cast Metal, Black, For Use With Concrete, Carpet, Tile, and Wood Floors

Category: Assembled Poke-Through Units

Non-Metallic, 1-Piece Raceway, PN05 Series. Size: 8' Length, 1-1/8" Width, 5/8" Height. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway

Brass Screw Plug To Abandon Service Fitting, Screws Into Housing

Category: Recessed Floor Box Plate Plugs

Accepts one CM2 Series communication connectivity and three Legrand AVIP or Extron Electronics MAAP Series Devices.

Category: Recessed Floor Box Service Fittings

Non-Metallic, Right End Cap, 5000 Series. Size: 5-29/32" Length, 1-3/16" Width, 5/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

5400 Series T Fitting. For branching raceway at right angles. Finish - White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

6' Plugmold Plus Multioutlet Strip comprised of eight 9 inch parts, GBA

Category: Single Circuit Non-Metallic Plugmold

Category 6 Keystone jack, Wiremold Ivory, 25pack

Category: Snap-In Cat 6 Jack Inserts

Exterior Box Cover Assembly L6-30R – Exterior box cover assembly prewired with (1) 30A L6-30R, 240 V corrosion-resistant receptacle, Brown

Category: Poke-Through Cover Assemblies

Installs of duplex devices in divided aluminum raceway. 6" (152mm) offset divider included. Can also be used with 106 communication frames.

Category: Plugmold Covers

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

Eleven 20A outlets with t-slots, 15' (4.6m) cord. Length 70" (1.8m). Receptacle center-to-center 6" (152mm). 20 Amp unit with a 20A resettable circuit breaker.

Category: Commercial Grade Power Strips

Makes a 90 degree external turn in a raceway run. Includes two pair of AL5201 Couplings.

Category: Large 2-Piece Metallic Raceway Elbows

For installation of one rectangular receptacle. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Gray. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Complete cover and stem assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color gray

Category: Assembled Poke-Through Units

Each location is sized to accept NEMA standard devices. Device bracket will fit both the EFSB2 and EFSB4 wall boxes. Includes 1 bracket.

Category: Recessed Home Entertainment Boxes

6' Plugmold Multioutlet System with 6 single outlets. 304 Stainless Steel

Category: Single Circuit Steel Plugmold

Eleven 20A outlets with t-slots, 6' (1.8m) cord. Length 70" (1.8m). Receptacle center-to-center 6" (152mm). 20 Amp unit with a 20A resettable circuit breaker.

Category: Commercial Grade Power Strips

Receptacle Mounting Bracket – Enables mounting of a duplex receptacle to 25DTP and AMDTP Series Tele-Power Poles.

Category: Power Pole Plates

FiberReady divided fitting to feed 5400 Series Raceway. Includes 1", 1 1/4", 1 1/2", and 2" trade size KOs on back and top. White

Category: 2-Piece Non-Metallic Raceway End Fittings