Advanced Control Softstarters

108 Found
ABB

Softstarter, 105A, 208 - 600VAC, 100 - 250VAc Control, 3PH (Lugs Built In, Good For Up To 2/0)

Item #: 2365550
CAT #: PSTX105-600-70
UPC: 320500501310
Company wide:
ABB

Softstarter - 142A, 208 - 600VAC, 100 - 250VAC Control, 3 PH, 24VDC Coil

Item #: 2155230
CAT #: PSTX142-600-70
UPC: 320500501464
Company wide:
ABB

Softstarter, 72A, 208 - 600VAC, 100 - 250VAC Control, 3PH

Item #: 2077521
CAT #: PSTX72-690-70
UPC: 888614237407
Company wide:
ABB

Softstarter, 570A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil

Item #: 1867369
CAT #: PSTX570-600-70
UPC: 320500508999
Company wide:
ABB

PSE, Softstart, 42 FLA, 34 FLA.

Item #: 640228
CAT #: PSE45-600-70
UPC: 804325571616
Company wide:
ABB

Softstarter

Item #: 1764564
CAT #: PSE250-600-70-1
UPC: 320500515034
Company wide:
ABB

Softstarter, 60A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Item #: 1944378
CAT #: PSTX60-690-70
UPC: 320500501372
Company wide:
Eaton

Soft Starter, S811+, 290 mm, 720 Amp, Pump Control with OPT Inside Delta

Item #: 1824996
CAT #: S811+V72P3S
UPC: 786685558622
Company wide:
Eaton

Soft Starter 200mm 304a W/ Opt Inside The Delta

Item #: 604861
CAT #: S811+T30N3S
UPC: 786685558998
Company wide:
Eaton

Soft Starter 65mm 66a W/ Opt Inside The Delta

Item #: 821910
CAT #: S811+N66N3S
UPC: 786685558912
Company wide:
Eaton

Soft Starter 200mm 240a W/ Opt Inside The Delta

Item #: 717409
CAT #: S811+T24N3S
UPC: 786685558981
Company wide:
ABB

Softstarter, 470A, 208 - 600VAC, 100 - 250VAC Control, 3PH

Item #: 1867368
CAT #: PSTX470-600-70
UPC: 320500508951
Company wide:
ABB

PSE, Softstart, 104 FLA, 80 FLA.

Item #: 1941864
CAT #: PSE105-600-70
UPC: 320500400675
Company wide:
ABB

PSTX250 600V 100-250VAC

Item #: 2410855
CAT #: PSTX250-600-70
UPC: 320500501549
Company wide:
Eaton

Motor Control Start

Item #: 1687964
CAT #: S811+T18P3S
UPC: 786685559001
Company wide:
Eaton

Soft Starter 200mm 500a W/ Opt Inside The Delta

Item #: 1629952
CAT #: S811+U50N3S
UPC: 786685879581
Company wide:
ABB

PSE, Softstart, 169 FLA, 130 FLA.

Item #: 642282
CAT #: PSE170-600-70
UPC: 804325571678
Company wide:
ABB

ABB PSTX142-690-70 Softstarter, 142A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Item #: 2010762
CAT #: PSTX142-690-70
UPC: 320500501457
Company wide:
ABB

Softstarter, 300A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Item #: 2753663
CAT #: PSTX300-690-70
UPC: 320500501488
Company wide:
Eaton

Soft Starter 65mm 37a W/ Opt Inside The Delta

Item #: 472716
CAT #: S811+N37N3S
UPC: 786685558899
Company wide:
ABB

PSE, Softstart, 68 FLA, 60 FLA.

Item #: 2598858
CAT #: PSE72-600-70
UPC: 320500400651
Company wide:
ABB

Softstarter, 720A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil

Item #: 2036159
CAT #: PSTX720-600-70
UPC: 320500510381
Company wide:
Eaton

ETN DS7-342SX032N0-N DS7 soft start

Item #: 1109652
CAT #: DS7-342SX032N0-N
UPC: 786685457703
Company wide:
ABB

Softstarter, 170A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Item #: 965451
CAT #: PSTX170-690-70
UPC: 888614237452
Company wide:
ABB

Softstarter, 105A, 208 - 600VAC, 100 - 250VAc Control, 3PH (Lugs Built In, Good For Up To 2/0)

Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0
Item #: 2365550
CAT #: PSTX105-600-70
UPC: 320500501310
Company wide:
ABB

Softstarter - 142A, 208 - 600VAC, 100 - 250VAC Control, 3 PH, 24VDC Coil

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 142 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 14.8" W: 7.8" D: 9.3" Weight: 15Lbs. 8 Inch Width, 15 Inch Height, 11 Inch Depth ** Qty 2 OF ASSOCIATED LUG KIT REQUIRED **
Item #: 2155230
CAT #: PSTX142-600-70
UPC: 320500501464
Company wide:
ABB

Softstarter, 72A, 208 - 600VAC, 100 - 250VAC Control, 3PH

Softstarter PSTX72-690-70 has a rated maximum operational current of 72 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2077521
CAT #: PSTX72-690-70
UPC: 888614237407
Company wide:
ABB

Softstarter, 570A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 590 FLA (Full Load Amps). Heavy Duty: 480 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. Weight: 60 Lbs. 14 Inch Width, 19 Inch Height, 11 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **
Item #: 1867369
CAT #: PSTX570-600-70
UPC: 320500508999
Company wide:
ABB

PSE, Softstart, 42 FLA, 34 FLA.

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.
Item #: 640228
CAT #: PSE45-600-70
UPC: 804325571616
Company wide:
ABB

Softstarter

Softstarter for Max 600V Main Voltage, 100-250V 50/60Hz Control Supply Voltage
Item #: 1764564
CAT #: PSE250-600-70-1
UPC: 320500515034
Company wide:
ABB

Softstarter, 60A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Softstarter PSTX60-690-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 1944378
CAT #: PSTX60-690-70
UPC: 320500501372
Company wide:
Eaton

Soft Starter, S811+, 290 mm, 720 Amp, Pump Control with OPT Inside Delta

Soft Starter, S811+, 290 mm, 720 Amp, Pump Control with OPT Inside Delta
Item #: 1824996
CAT #: S811+V72P3S
UPC: 786685558622
Company wide:
Eaton

Soft Starter 200mm 304a W/ Opt Inside The Delta

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 304 Amp, Non-Combination, 200 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 75 @ 200V, 100 @ 230V, 250 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode. ***Must use C-H Power Supply and (2) Lug Kits***
Item #: 604861
CAT #: S811+T30N3S
UPC: 786685558998
Company wide:
Eaton

Soft Starter 65mm 66a W/ Opt Inside The Delta

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 66 Amp, Non-Combination, 65 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 15 @ 200V, 20 @ 230V, 40 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode and Lugs. ***Must use C-H Power Supply***
Item #: 821910
CAT #: S811+N66N3S
UPC: 786685558912
Company wide:
Eaton

Soft Starter 200mm 240a W/ Opt Inside The Delta

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 240 Amp, Non-Combination, 200 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 60 @ 200V, 75 @ 230V, 150 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode. ***Must use C-H Power Supply and (2) Lug Kits***
Item #: 717409
CAT #: S811+T24N3S
UPC: 786685558981
Company wide:
ABB

Softstarter, 470A, 208 - 600VAC, 100 - 250VAC Control, 3PH

PSTX470-600-70 Softstarter For Max 600V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage, 14 Inch Width,19 Inch Height, 11 Inch Depth
Item #: 1867368
CAT #: PSTX470-600-70
UPC: 320500508951
Company wide:
ABB

PSE, Softstart, 104 FLA, 80 FLA.

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 104 FLA (Full Load Amps). Heavy Duty: 80 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.
Item #: 1941864
CAT #: PSE105-600-70
UPC: 320500400675
Company wide:
ABB

PSTX250 600V 100-250VAC

PSTX250 600V 100-250VAC
Item #: 2410855
CAT #: PSTX250-600-70
UPC: 320500501549
Company wide:
Eaton

Motor Control Start

S811+ Soft Starter, 180A, T-frame, Premium, 600V rated, Level/Edge Sense, Three-pole, 24V power, 47-63 Hz, 1-2 conductors, #3 AWG to 500 kcmil wire, 120 Vdc, 240 Vac, Modbus RTU, NEMA 0, LCD display, -30 C to -50 C
Item #: 1687964
CAT #: S811+T18P3S
UPC: 786685559001
Company wide:
Eaton

Soft Starter 200mm 500a W/ Opt Inside The Delta

Eaton S811+ Soft Starter, Frame U, 500 A, 400 hp, 480 V, # 4 AWG to 500 kcmil, 156-500 FLA, 24 Vdc, 200-600 V Operating, 1-2 Conductors, LCD, HLD Circuit Breaker, Class RK5/J Fuse
Item #: 1629952
CAT #: S811+U50N3S
UPC: 786685879581
Company wide:
ABB

PSE, Softstart, 169 FLA, 130 FLA.

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 169 FLA (Full Load Amps). Heavy Duty: 130 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass. ***Lugs Required, See Associated Items For Lugs***
Item #: 642282
CAT #: PSE170-600-70
UPC: 804325571678
Company wide:
ABB

ABB PSTX142-690-70 Softstarter, 142A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Softstarter PSTX142-690-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2010762
CAT #: PSTX142-690-70
UPC: 320500501457
Company wide:
ABB

Softstarter, 300A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Softstarter PSTX 300-690-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 2753663
CAT #: PSTX300-690-70
UPC: 320500501488
Company wide:
Eaton

Soft Starter 65mm 37a W/ Opt Inside The Delta

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 37 Amp, Non-Combination, 65 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 10 @ 200V, 10 @ 230V, 20 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode and Lugs. ***Must use C-H Power Supply***
Item #: 472716
CAT #: S811+N37N3S
UPC: 786685558899
Company wide:
ABB

PSE, Softstart, 68 FLA, 60 FLA.

PSE Series Softstart (Compact Style.) Motor Voltage: 208 - 600 Volt AC. Control Voltage: 120/240 Volt AC. Normal Duty: 68 FLA (Full Load Amps). Heavy Duty: 60 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.
Item #: 2598858
CAT #: PSE72-600-70
UPC: 320500400651
Company wide:
ABB

Softstarter, 720A, 208 - 600VAC, 100 - 250VAC Control, 3PH, 24VDC Coil

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 15" W: 17" D: 15" Weight: 103Lbs. 36 Inch Width, 60 Inch Height, 16 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **
Item #: 2036159
CAT #: PSTX720-600-70
UPC: 320500510381
Company wide:
Eaton

ETN DS7-342SX032N0-N DS7 soft start

5 hp at 200 V, 10 hp at 230 V, 20 hp at 480 V 50 A class RK5 max 32A
Item #: 1109652
CAT #: DS7-342SX032N0-N
UPC: 786685457703
Company wide:
ABB

Softstarter, 170A, 208 - 690VAC, 100 - 250VAC Control, 3PH

Softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard
Item #: 965451
CAT #: PSTX170-690-70
UPC: 888614237452
Company wide:
108 Items found